Winix Air Cleaner - Manual (Page 6)

• PlasmaWave™ (All)
In the final stage of cleaning, Winix
PlasmaWave
TM technology generates
both positive and negative ions to create
plasma clusters which instantly neutralize
viruses, bacteria, chemical vapors and
odors in the air.
5
NOTE: Follow these instructions for best
results.
• Place unit at least 7 feet from equipment
that emits electric waves such as
televisions or radios.
• Place unit at least 2 feet from the wall.
• Keep sensors away from drafty areas.
• Keep curtains away from sensors, as
they may interfere with air intake/outlet.
• Place unit on a stable surface with plenty
of air circulation.
1. Remove protective film from the
control panel.
2. Remove the front
panel by grasping
the bottom outside
edges and gently
pulling toward you.
3. Pull out the filter
cassette by grasping
the tabs located on
each side of the filter
cassette. (There are
no tabs on 5000B
HEPA filter.)
4. Remove the plastic
wrap from the filter
cassette.
5. Return the filter
cassette into the
main unit.
6. Replace the front panel
by hooking the front
panel on the top of the
unit. Swing panel in by
pushing gently until the
panel snaps into place.
7. Plug in the power cord to a wall outlet.
8. Press POWER button until short
“beep” is heard.
AIR CLEANER SET-UP
For the first 4 minutes after turning the
unit on, the dust and odor indicators will
flash while the unit measures air quality.
• Washable Carbon Filter
(5000 & 5000S)
Activated granular carbon effectively
collects chemical vapors and odors
caused by cigarette smoke, organic
decay, and cooking.