Walker MDD - Manual (Page 10)

8
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker ® replacement parts. Effective Date 03-01-06
BODY ASSEMBLY (SD MODELS)
Utility Bed Assembly
1 8650-10 Bed Liner (21.5 x 27.5) 1
2 7650-3 Utility Bed (Includes Item # 1) 1
3 7190-2 Insulation Foam Pad, RH 1
4 7190-1 Insulation Foam Pad, LH 1
Rear Bumper Assembly (SD Models)
5 7153-3 Cover Plate 1
6 5845 Rubber Bumper (1.50 x 1.25) 1
7 7145 Gas Spring Assembly 1
(Includes Items # 8 & 9)
8 7147 Spring Clip 2
9 7146 13mm Ball Stud 2
10 7521-5 Rear Bumper 1
11 NS Recovery Tank Mount 1
(19449-72502 Kubota)
12 7047-5 Mount Plate 1
13 5832 Cable Clamp (1/2) 2
14 5162 Roller Wheel (5" Rubber) 2
15 7105-5 Rear Body Panel 1
Fasteners
F002 10-24 Keps Nut 11
F004 1/4-20 Keps Nut 4
F009 5/16-18 Whiz Locknut 4
F012 3/8-16 Keps Nut 6
F013 3/8-16 Whiz Locknut 4
F014 3/8-16 ESNA Nut 2
F025 10-24 x 3/8 PPHMS 6
F026 10-24 x 1/2 PPHMS 1
F038 3/8-16 x 1 Hex Bolt 6
F040 3/8-16 x 1-1/2 Hex Bolt 2
F042 3/8-16 x 2-1/4 Hex Bolt 2
F051 3/8 SAE Washer 4
F059 3/8 Wave Spring Washer 2
F104 1/4-20 x 3/4 PFH Bolt 4
F128 10-24 x 3/8 PTHMS 4
NOTE: Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS),
Page 4 for all common parts used on both models.