White Rodgers 1F95W-80 - Manual (Page 19)

19
thermostat can be programmed. You may select
up to two heating temperatures (HEAT O for
occupied temperature and HEAT U for unoccu-
pied temperature), and up to two cooling tem-
peratures (COOL O and COOL U).
To operate properly in the AUTO mode, there
must be a minimum 1
°
F separation between
the highest heat temperature and the lowest
cool temperature.
Now look at the factory preprogrammed times
and temperatures shown below. If this program
will suit your needs, simply press RUN
PRGM
to begin
running the factory preset program.
If you want to change the preprogrammed times
and temperatures, do the following.
Determine the heating and cooling times and
temperatures you want to use. Use the following
table to plan your program time periods and
temperatures. You may also want to look at the
sample program table to get an idea of how the
Heating Program for ALL days of the Week:
PERIOD TIME TEMP
Occupied (O)
Unoccupied (U)
8:00 AM
5:00 PM 70
64
FAN
PRG
AUTO
DAMPER
Open
Closed
Cooling Program for ALL days of the Week:
PERIOD TIME TEMP
Occupied (O)
Unoccupied (U)
8:00 AM
5:00 PM 78
82
FAN
PRG
AUTO
DAMPER
Open
Closed
FACTORY PREPROGRAMMING
NOTE