Wibur Curtis Company PCGT3 - Manual (Page 3)

Large Capacity Drip
Tray/Cup Guide
Integral guide, positions cups
directly below dispensing spout.
Dual overflow via-ducts indicate
when drip tray should be drained
and serviced.
Angled Whipping
Chamber and “Brake-Type”
Auger Motors
To ensure perfect drinks, powder
augers feature a brake-type motor
that accurately stops the dispensing
process at your set ratio every time.
Angled chamber drain liquids far
better to significantly reduce cleaning
requirements.
Multi-Volume Powder Hoppers
Both 5 lb. and 10 lb. sizes allow operators to double the
volume of top selling flavors... reducing fill times.
Hoppers must be removed for refilling, virtually eliminat-
ing the wear and operating downtime caused by spilled
powder. Positioning guides make it impossible to insert
the hoppers incorrectly.
Pre-Dispense Control Label
Each adjustable station is factory preset to:
12 oz. small cup; 16 oz. medium cup; 20 oz. large cup.
Easy Access Front
Open Door with Inside
Hinged Panel
Simplifies powder refills and
maintenance. Provides easy
access to change lighted
graphic or replace the units
standard florescent tube.
Touch-Button Hot Water Cleaning System
Simple, one button operation sends a powerful blast of
hot water into the whipper chamber, rinsing it for easy
clean-up and reducing powder build up.
Easy-Serv Dispensing Tubes.
Bright yellow color directs customers to proper cup
placement. Extended, taper design prevents splashes.
Oversized Backlighted Graphic
Attracts customers. Increases impulse sales. Choose
Hot or Iced Cappuccino graphic on PCGT3 model.
PCGT3 PCGT4
SERIES PRIMO CAPPUCCINO MACHINE.