Windsor Walk Behind Scrubber SCX326 - Manual (Page 19)

MAINTENANCE
CUTTER 36V 86039100 05/01/07 4-1
SERVICE SCHEDULE
MAINTENANCE DAILY WEEKLY MONTHLY 50
HRS
100
HRS
200
HRS
Check batteries after charging; add water if
necessary
*
Check pad wear to prevent buildup of
chemicals
*
Check linkages and connectors for wear and
damage
*
Check hoses for wear, blockages, or damage *
Clean squeegee; check for adjustment;
inspect for wear
*
Check handles, switches, knobs, domes, and
gaskets for damage
*
Clean out recovery tank *
Clean out solution tank; remove and clean
screen
*
Clean outside of all tanks; check for damage *
Run vac motor for at least one minute to
allow motor to dry
*
Store with dome off tank to allow the tank to
dry
*
Check scrub deck splash skirt *
Check batteries for corrosion, cracks and
evidence of overheating *
Check all bearings for noise *
Check all gaskets for wear and leakage *
Check vac motor carbon brushes *
Check brushes for wear; ensure bristles are
not damaged *
Check linkages for wear and damage *
Grease wheels and casters *
Grease axle *
Check squeegee blades for wear and frame
for damage *
Check overall performance of machine *
Lubricate squeegee caster *
Clean batteries and terminals *
Thoroughly clean the machine *
Check carbon brushes in all vacuum, brush
drive, and propel motors
*
Blow out dust in motors *
Inspect motor commutators *
Clean chains, cables and pulleys *
Clean pivot points on squeegee and scrub
deck linkages
*