Wacom DTF-521 - Manual (Page 3)

Introduction and overview
Page 1
INTRODUCTION AND OVERVIEW
The Wacom ® DTF-521 interactive pen display combines the benefits of a Liquid Crystal Display (LCD)
with the control, comfort, and productivity of Wacom’s cordless, battery-free pen technology. This gives
you a direct pen-on-screen interface for your computer.
The basic components of the DTF-521 include a Wacom pen tablet internally mounted behind a 15.0"
diagonal TFT color display, and a Wacom pen.
The DTF-521 also comes equipped with a VGA pass-thru ( ANALOG RGB OUT) port, enabling you to
simultaneously connect a VGA monitor or projector to the pen display.
This manual describes how to install the DTF-521 hardware and software. It also describes how to use
the DTF-521 and pen.
Please follow all instructions carefully.
The computer treats the DTF-521 as two separate devices (the display and the pen tablet).
Therefore, the installation process is completed in two stages:
• First install the DTF-521 as a display.
• Then install the DTF-521 as a pen tablet.
Both stages require hardware and software installations and adjustments. Please follow all
instructions carefully.
IMPORTANT: You MUST install the Wacom pen tablet driver software for correct pen-on-screen
functionality.
To learn about using the Pen Tablet control panel to customize your pen display tablet and pen settings
on Windows or Macintosh computers, see
Customizing on page 19.
The following kinds of information are not included with this product: information about your specific
computer hardware or operating system, or information about your application software. Your best
source for this information is the set of manuals and discs that came with your hardware, operating
system, or application.
DTF521_Manual.fm Page 1 Thursday, October 25, 2007 3:46 PM