Wacom DTF-521 - Manual (Page 51)

Appendix
Page 49
PRODUCT SPECIFICATIONS
GENERAL SPECIFICATIONS
DISPLAY
Physical dimensions (W x D x H) 344.0 x 300.0 x 49.0 mm (13.6 x 11.8 x 1.9 in), excluding stand
Weight 4.6 kg (10.1 lb), including stand
Input voltage 12 VDC
Power consumption 23W or less
Operating temperature and humidity 5° to 35° C, 20 to 80% RH (non-condensing)
Storage temperature and humidity -10° to 60° C, 20 to 90% RH (non-condensing)
(maximum storage humidity is 38% at a temperature of 60° C, and
maximum storage temperature is 42° C at a humidity of 90%)
Certification and compliance FCC part 15 class B, Industry Canada Class B, CE, EDID 1.3, C-tick,
BSMI, MIC, CCC, The European Union RoHS Directive 2002/95/EC
Display a-Si TFT active matrix LCD
Screen size 15.0 in, diagonal
Signal inputs VGA (Analog RGB)
Signal outputs VGA (Analog RGB)
Resolution 1024 x 768 pixels (XGA), 800 x 600 pixels (SVGA),
640 x 480 pixels (VGA)
Refresh rate 45 to 70 Hz (vertical) in XGA mode,
45 to 75 Hz (vertical) in other modes
All scan modes are non-interlaced.
Pixel pitch 0.297 x 0.297 mm (0.012 x 0.012 in)
Color depth 16.2 million (6 bits for RGB + FRC)
Brightness
250 cd/m
2
(typical)
Contrast ratio 500:1
Plug and Play DDC2B
LCD quality Each DTF-521 LCD panel is produced under very stringent quality
standards. Production techniques cannot guarantee an absolutely
perfect TFT display. Wacom does not allow any pixel to be always
white or always black. A small number of pixels (4 or less) are
allowed to show a wrong color for some parts of the color spectrum.
This does not mean the display is defective.
DTF521_Manual.fm Page 49 Thursday, October 25, 2007 3:46 PM