Wacom Cintiq DTZ-2000W - Manual (Page 16)

Cintiq pen display components
Page 14
Rear view
Next step: Installation. See page 15.
Integrated pen holder and alternate cable exit
The pen can be stored here. If you are not using
the Cintiq stand supplied with the unit, you can
route the cable to exit from this location. See
Using an alternate mount or stand on page 57.
Digital/Analog (DVI/VGA) switch
Set this switch for the video
connection you will be using.
Cabling and connectors
The connectors on the integrated cable are
for DVI-I video, USB data, and power.
Bearing hub
Fits into the bearing
recess on the Cintiq
stand. Allows rotation
of Cintiq, and easy
mounting and removal
from the stand.
On Screen Display (OSD) controls
These controls enable you to adjust a variety of display settings.
See Adjusting the LCD monitor on page 36 for more information.
Important: Always store the pen display on the Cintiq display stand or in its original
packing carton when not in use. Do not store the display unit on a surface that would
excessively bend or crimp the cable.
Touch Strip
Touch Strip
Slide your finger
over the Touch
Strips to zoom,
scroll, or perform
custom keystroke
actions. See
Working with the
tablet controls on
page 25.
Kensington
security slot
Allows easy
attachment of a
security cable.
Pen tether
attachment point
If you will be using a
pen tether, connect it
to the attachment
point located on
either side of the unit.
Cintiq20WSX_Manual.fm Page 14 Monday, January 15, 2007 9:23 AM