Wisdom Audio Wisdom & Sage Series SC-1 User Manual
Page 28
28
Multi-Zone Setup (part 1)
If you are setting up more than a single zone, choose the setting in this menu
that is the sum of all zones. For example, if you have a primary zone with a 5.1
theater, and a secondary zone with a 2.1 music system, select a 7.2 system. If
you want to have three 2.1 systems, we recommend choosing “6.3 Phantom”
since it keeps things a bit simpler later on. (See pp. 32–33.)
This step is important, since System Configuration passes along information to
MultEQ Pro about which channels of hardware are going to be used. You will
finish the process of defining which channels are used for which speaker, and
which zones, later when you get to MultEQ Pro.
Speaker Selection
The second tab provides visual confirmation that the basic system description
you selected is appropriate, and a graphic way to tell the SC-1 which loudspeak-
ers you are using on each channel.
Follow the on-screen instructions, as shown below.
Speaker Selection screen 1
When you select a particular speaker location, the chosen speaker will be high-
lighted and the right-hand panel will change to show you the various possibili-
ties available for that speaker, as seen below.