Wolf Appliance Company DUAL FUEL RANGES - Manual (Page 26)

26
SETTING CONTROLS
for Bake Stone Mode
1) Turn oven selector knob
bezel counter clockwise to
STONE.
2) Oven temperature is preset
at 400˚F (205˚C). Touch
ENTER on the hidden control
panel or after 2 seconds the
oven will turn on by default.
To change the temperature
from 400 ˚F (205˚C), immedi-
ately turn the oven selector
knob to the right to increase
the oven temperature or to the
left to decrease the oven
temperature setting.
The temperature display alter-
nates between set temperature
and actual oven temperature.
3) Add food when the chime
signals oven has reached
preheat temperature.
CAUTION
Avoid cooking foods with
a high fat content on the
bake stone. The porous
ceramic material will
absorb the grease and
discolor the stone. Flare-
ups can occur.
W
O L F
O
V E N
O
P E R A T I O N
4) If temperature probe is
used, follow Probe Feature
directions on page 38.
5) If timer is set, oven will
chime when one minute is left
on timer.
6) Remove food.
7) Turn oven selector knob
bezel to OFF to end this
mode.
8) When oven and bake stone
have cooled, remove bake
stone, element and special
rack.
SAFETY PRACTICES
for Bake Stone Mode
• Allow stone to cool before
removing from oven. Do not
remove while it is still hot.
• Do not touch the bake stone
element while it is hot. Let it
cool completely before remov-
ing.
• Use care in handling the bake
stone. It will chip or break if it
is dropped.