Wacom 12WX - Manual (Page 15)

Installation
Page 13
DISPLAY CABLING DIAGRAM
Cintiq
– B –
DVI or VGA
video card
Rear panel
of computer
Power adapter
– D –
To AC outlet
– E –
Caution Make sure your video card has a DVI or VGA connector, and that you correctly set the Cintiq
DVI/VGA switch for the video connection you are using.
Use only the converter unit and power adapter that came with Cintiq; use of an improper
converter or power adapter may damage the unit.
Do not connect or disconnect the video or power cables while Cintiq or your computer are turned
on – this can damage the display or computer video card.
Make sure that the display refresh rate does not exceed the maximum vertical frequency that
Cintiq can support. See “Product specifications” on page 59 for details.
– A –
– C –
DVI VGA