Western Telematic 12651 - Manual (Page 3)

1. Introduction
Network equipment sometimes "locks-up", making it impossible
to communicate. The RPB+ Remote Power Boot Switch can
switch AC power on 5 individually controlled plugs, allowing
attached equipment to reset (re-boot).
ASCII commands are sent to the RS-232 Control Port to select
plugs, and specify On, Off, or Boot operations. A convenient
Status Screen shows On/Off conditions at each plug. RPB+
features include a security password, Location I.D. field, and
plug labels to identify the device connected to each plug.
Features:
· Remotely Toggles AC Power to Five Separate Outlets.
· Serial RS232 Control Port Interfaces Directly with a PC or
External Modem, Allowing Local or Remote Control.
· Status Display Shows Plug Labels and On/Off Conditions.
· Simple ASCII Commands for On, Off, or Boot (Off/On).
· User-Selectable Re-Boot Cycle Duration (Off Time).
· User-Programmable Password Feature.
· User-Programmable Location I.D.
· User-Selectable Echo Mode.
· User-Programmable Plug Labels.
· User-Programmable Power-Up Defaults.
· Requires Only One Rack Space.
· Available in 115 VAC or 230 VAC Configurations
Typographic Conventions
Throughout this manual, typefaces and characters have been used
to denote the following:
COURIER FONT Indicates characters typed on the keyboard.
For example, /S or /3 ON.
[Bold Font] Text set in bold face and enclosed in
square brackets indicates a specific key.
For example, [Enter] or [Esc].
Page 1