Gas rangetop operation, Infrared charbroiler – Wolf Range User Manual

Page 12

Advertising
background image

Gas Rangetop Operation

12

Infrared Charbroiler

The optional charbroiler has an infrared burner to give the

most efficient method of gas grilling. The burner becomes

an orange-red color at the surface of the ceramic tile.

When it glows, it transfers intense heat to the food. This

sears the outside of the food to lock in juices and flavor.

IMPORTANT NOTE:

Cook food directly on the charbroiler

grate, do not use cookware.

STAINLESS

STEEL

GRATE

Charbroiler grate.

Blank-off plate.

BLANK-OFF

PLATE

IGNITER

WIRE MESH

SCREEN

Use caution when positioning the blank-off plate to

avoid damage to the ceramic tiles. Avoid contact with

the igniter; it is fragile and can chip or break.

INSTALL BLANK-OFF PLATE

To convert the charbroiler to a lower heat output for more

even cooking, install the blank-off plate provided with your

gas rangetop. This stainless steel plate is placed directly

on the ceramic tiles.

Install the blank-off plate when the charbroiler is off and is

completely cool. Be sure to remove the plastic film from

the blank-off plate before installing.

To install the blank-off plate, remove the stainless steel

grate and wire mesh screen. Position the blank-off plate in

the middle of the ceramic tiles. Reinstall the wire mesh

screen with the notch at the left rear. Reinstall the grate.

Refer to the illustrations below.

Advertising