Gas rangetop operation, Infrared griddle – Wolf Range User Manual

Page 15

Advertising
background image

Gas Rangetop Operation

15

wolfappliance.com

GRIDDLE OPERATION

IMPORTANT NOTE:

The stainless steel cover must be

removed prior to operating the griddle.

Turn on the ventilation hood five minutes prior to using

the griddle.

To heat the griddle, push in the control knob and turn

counterclockwise to the desired temperature. It is

normal to hear a clicking sound. This is the electronic

ignition lighting the burner. When the burner is lit, the

thermostat will control the temperature.

When the griddle is preheated, the griddle indicator

light will go out. The light will cycle on and off as the

thermostat requires more heat to maintain the set

temperature. This will allow heat to be evenly distrib-

uted and the griddle to maintain the set temperature.

The double griddle has two burners with separate

control knobs that act independently of each other. If

only one griddle is being used, there will be some heat

transfer to the inactive griddle.

To turn the griddle off, turn the control knob clockwise

to the OFF position.

Infrared Griddle

The optional griddle is thermostatically controlled, which

means once the set temperature is reached, the heat

cycles to hold that temperature. To prevent food from

sticking and to protect the surface from moisture, it is

necessary to “season” the griddle prior to use. This

seasoning process as well as general use will change the

appearance of the griddle.

SEASON THE GRIDDLE

The griddle is shipped with a protective oil coating the

surface, use hot water and detergent to clean. Rinse

and dry.

Turn on the ventilation hood five minutes prior to using

the griddle.

The griddle needs to go through a “burn in” period.

Turn the griddle on at 350°F (175°C) for 30 minutes to

clean oils from the bottom of the griddle. After 30

minutes, turn the griddle off and allow it to cool.

To season, pour a teaspoon (5 ml) of peanut or

vegetable oil per single griddle in the center; spread

evenly with a paper towel, avoiding the corners. Be

careful not to apply too much oil. Excess oil will leave a

gummy residue that will have to be removed.

Push and turn the control knob to 350°F (175°C). Heat

until you see the first signs of smoke. Turn the griddle

off. When the griddle has cooled and is only slightly

warm, wipe off any excess oil. Let the griddle cool

completely.

Repeat with another teaspoon of oil. The brown

appearance will darken with use.

OFF

0

0

2

00

1

50

2

5

0

30

0

3

1

0

0

4

5

0

Griddle control knob.

Advertising