3 user authentication, 4 encryption, 3 user authentication 9.2.4 encryption – ZyXEL Communications P-2602HW(L) Series User Manual

Page 123

Advertising
background image

P-2602H(W)(L)-DxA Series User’s Guide

Chapter 9 Wireless LAN

123

9.2.3 User Authentication

Authentication is the process of verifying whether a wireless device is allowed to use the
wireless network. You can make every user log in to the wireless network before they can use
it. However, every device in the wireless network has to support IEEE 802.1x to do this.

For wireless networks, you can store the user names and passwords for each user in a RADIUS
server. This is a server used in businesses more than in homes. If you do not have a RADIUS
server, you cannot set up user names and passwords for your users.

Unauthorized wireless devices can still see the information that is sent in the wireless network,
even if they cannot use the wireless network. Furthermore, there are ways for unauthorized
wireless users to get a valid user name and password. Then, they can use that user name and
password to use the wireless network.

9.2.4 Encryption

Wireless networks can use encryption to protect the information that is sent in the wireless
network. Encryption is like a secret code. If you do not know the secret code, you cannot
understand the message.

The types of encryption you can choose depend on the type of authentication. (See

section

9.2.3 on page 123

for information about this.)

For example, if the wireless network has a RADIUS server, you can choose WPA or WPA2.
If users do not log in to the wireless network, you can choose no encryption, Static WEP,
WPA-PSK, or WPA2-PSK.

Usually, you should set up the strongest encryption that every device in the wireless network
supports. For example, suppose you have a wireless network with the ZyXEL Device and you
do not have a RADIUS server. Therefore, there is no authentication. Suppose the wireless
network has two devices. Device A only supports WEP, and device B supports WEP and
WPA. Therefore, you should set up Static WEP in the wireless network.

Note: It is recommended that wireless networks use WPA-PSK, WPA, or stronger

encryption. The other types of encryption are better than none at all, but it is still
possible for unauthorized wireless devices to figure out the original information
pretty quickly.

Table 35 Types of Encryption for Each Type of Authentication

No Authentication

RADIUS Server

Weakest

No Security

WPA

Static WEP

WPA-PSK

Strongest

WPA2-PSK

WPA2

Advertising
This manual is related to the following products: