Installation manual xmd076a – XM Satellite Radio XMD076A User Manual

Page 7

Advertising
background image

Installation Manual

XMD076A

XMD076A-3

Information is subject to the

3

Rev

C

,

06/22/06

restrictions on the title page

H E A D S U P T E C H N O L O G I E S

1.2 Technical

Specifications

STANDARD FEATURES

Display

None. User interface through XMC050 controller

WX Interface

RS232, 115.2Kbaud, No parity, 8-bit, 1 stop bit

Audio Interface
(Typical)

Stereo 600-ohm balanced transformer, 0dBV nominal
level, <-50dBV (when muted) to +12dBV (Full volume)

Wireless Link

Bluetooth Class 2 (low power, 25 Ft. LOS Range)

FCC ID # TGVXMSC63. This device complies with Part 15 of
the FCC rules subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept all interference received, including

interference that may cause undesired operation.

Wireless Antenna

GigaAnt Titanis 2.4GHz, P/N 2010B4844-01 Gain: 4.4dBi

PHYSICAL CHARACTERISTICS

Receiver Weight

1.7 lbs.

Receiver
Dimensions H, W, L

1.8 X 6.5 X 7.8 Inches (Refer to Appendix B for more
detail)

Antenna Weight

Refer to specific antenna installation drawing

OPERATING LIMITS

Power Input Voltage

11-32VDC, negative ground

Steady State
Current

0.63A at 11.0VDC minimum power input voltage

0.48A at 13.8VDC power input voltage

0.26A at 27.6VDC power input voltage

1.2.1 Environmental Qualification Identification

IAW RTCA DO-160E Appendix A and Heads Up Technologies document XMD076A-34,
the following environmental category identification applies to the XMD076A:

“DO-160E Env. Cat.,[(F2)X]BBB[SBM]HXXXFXZ[(B)(Z)]AZ[ZC][RR]M[Z2XXX]XXAX”

For a description of the equipment categories, refer to Environmental Qualification
Forms included in Appendix A.

Advertising