Yamaha YHT-470 - Manual (Page 8)

8
Selecting time displays
You can select any of the four time displays by pressing the TIME display modeselect button.
Note
The remaining time
➁
will not be displayed for track number
25 or higher.
Changing brightness of the display
If desired, you can change brightness of the display in three
degrees by pressing the MODE button.
Normal illumination
Slightly dim
Dim
When you listen with headphones
Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL buttons.
At that time, note that this adjustment will also vary the signal level output to the amplifier.
➀
Elapsed time of the track now playing
➁ Remaining time of the track now playing
➃
Total remaining time on the disc
➂ Total disc play time
TIME
MODE
PHONES
OUTPUT LEVEL
DOWN UP OUTPUT LEVEL
DOWN UP
or
PHONES