Yamaha DSP-AX1 - Manual (Page 34)

32
Basic Operation
Selecting a Source
1 1 Select the source using INPUT SELECTOR , or press one of the
input buttons on the remote control.
• The current source is indicated on the front panel display with an arrow.
• The current source name and input mode appear on the front panel display
and the video monitor for a few seconds.
DVD .................................. DVD player
LD ...................................... LD player
D-TV .................................. Digital TV or TV
CBL/SAT ........................... Cable TV or Satellite tuner
VCR 1 ................................ Video deck 1
VCR 2 ................................ Video deck 2
VCR 3 ................................ Video deck 3
V-AUX .............................. Other A/V equipment
PHONO ............................. Turntable
CD ...................................... CD player
TUNER .............................. AM/FM tuner
TAPE ................................. TAPE deck
MD ..................................... MD recorder
2 2 Start playback (or select a broadcast station) on the source
equipment.
• Refer to the operation instructions for the equipment.
3 3 Adjust VOLUME (or VOLUME +/– on the remote control).
Caution:
• If the power of the equipment connected to the VCR 1 , VCR 2 , VCR 3 , TAPE ,
and MD OUT jacks is turned off, reproduced sound may be distorted or the volume
may be lowered. In these cases, turn on the equipment.
■ BGV (Back Ground Video) Function
The BGV (Back Ground Video) function allows you to combine a video signal
from a video source with a sound signal from an audio source. (For example, you
can listen to classical music while you are watching a video.)
Using the remote control, select a source from the video group, then select a
source from the audio group. Use the input buttons on the remote control to make
your selections. The BGV function does not work if you select the sources using
INPUT SELECTOR on the front panel.
INPUT SELECTOR V-AUX TAPE PHONO
D-TV CBL/SAT TUNER MD CD
VCR 1 VCR 2 VCR 3 LD DVD
+
VOLUME
–
VOLUME
Basic Playback
LD
D-TV
CBL/SAT
VCR 1
VCR 2
VCR 3
V-AUX
DVD
MD
TAPE
TUNER
CD
PHONO
Select this
source: To reproduce the signal
from this equipment.
The selected source