Yamaha DSP-AX1 - Manual (Page 64)

62
Advanced Operation
1 1 Press CLEAR using a ballpoint pen or similar object.
2 2 Press
%
/
%
to select the clear mode. The mode is shown
in the window in the following order:
Clearing Learned Functions, Macros, Renamed Displays,
and Manufacturer Setups
Remote Control Features
Notes:
• If the remote control is without batteries for more than twenty minutes, or if worn out batteries remain in the unit, the contents of the memory may be
cleared.
When the memory is cleared, insert new batteries and program any acquired functions that may have been cleared.
• “ERROR” appears in the display window for the following conditions: when pressing a button other than the cursor and ENTER ; when pressing more than
one button at once; and when one of MACRO ON/OFF , 10KEY/DSP , PARAMETER/SET MENU is switched to another position.
6CH INPUT
TITLE
ENTER
MENU SOUND DISPLAY
SOURCE
SELECT SEARCH CHAPTER
%
! ! $
* #
$
%
%
%
%
%
POWER REC STOP PAUSE PLAY
+ –
/
CLEAR
CLEAR
CLEAR
For example, when DVD is selected as
the source component.
3 3 Press and hold CLEAR again for about 3 seconds.
• “C:NG” appears in the display window if the operation is
unsuccessful.
4 4 Press CLEAR to confirm clearing.
• Once you clear a learned function or macro from a button, the
button reverts to its factory preset function or macro.
Clears all programmed functions
including manufacturer code presets.
This returns to the factory presets.
(L: name of a component) Clears all
learning functions of the component.
Clears all learning functions of the
main unit control area (see page 50).
Clears all learning functions.
Clears all macros.
Clears all renamed displays in the
display window.