Off timer/on timer setup, Auto off setup – Zenith R40W46 User Manual
Page 13
Off Timer/On Timer Setup
Off Timer automatically switches the TV to standby mode at the preset
time.
On Timer automatically turns the TV on at the preset time and tunes to
the specified channel.
1. Press the menu button and then use
D
/
E
button to select the
Timer menu.
2. Press the
G
and then use
D
/
E
button to select
Off timer
or
On
timer
.
3. Press the
G
and then use
D
/
E
button to set the hour.
4. Press the
G
and then use
D
/
E
button to set the minute.
5. For only
On timer
function: Press the
G
and then use
D
/
E
button to set the desired channel.
Press the
G
and then use
D
/
E
button to set the volume level at
turn on.
6.
Run/Hold
is used to activate or deactivate preset on/off timers.
Press the
G
and then use
D
/
E
button to select
Hold
or
Run
.
7. Press the exit button to return to TV viewing.
Notes
• Two hours after the set is turned on by the on timer function, it will
automatically revert back to standby mode unless a button has been
pressed.
• This function works only in standby mode.
• If the same time is set for the on time and off time, only the off time
operates.
Auto Off Setup
If an input signal is not present, the TV is automatically switched to
standby mode after 10 minutes.
1. Press the menu button and then use
D
/
E
button to select the
Timer menu.
2. Press the
G
and then use
D
/
E
button to select
Auto off
.
3. Press the
G
and then use
D
/
E
button to select
On
or
Off
.
4. Press the exit button to return to TV viewing.
13
CH.
}
}{
+
Move
++
+
Adjust
++
Å
+
Back
Clock
{
{
Off timer
{
{
On timer
{
{
Auto off
{
{
Timer
- - : - - AM
TV 2
Vol 30
Hold
- -
AM
CH.
+
Move
++
Å
}
}
Back
Clock
{
{
Off timer
{
{
On timer
{
{
Auto off
{
{
Timer
On
Off
Off