Antenna connections, Connecting an outdoor antenna, Connecting a catv cable – Zenith R40W46 User Manual

Page 28

Advertising
background image

Connecting an Outdoor Antenna

For the best signal reception, we recommend you use an outdoor antenna.
Severely weathered antennas and antenna cables can reduce the signal quality. Before connecting an
outdoor antenna, inspect it yourself or have a TV technician inspect it. Any service center can explain the
various outdoor antenna options available to you.

Connecting a CATV Cable

If you subscribe to a CATV system, use the antenna connection described below.

1. Remove the 300 to 75 ohm adapter or the cable from the set if attached.
2. Connect the CATV cable (75 ohm coaxial cable) to the 75 ohm antenna jack.

300 Ohm Flat Wire
1. Connect the 300 ohm flat wire to screws on the

300 ohm to 75 ohm adapter.

2. Push the end of 300 ohm to 75 ohm adapter

onto 75 ohm antenna jack.

75 Ohm Coaxial Cable
1. Connect the 75 ohm coaxial cable directly to

the 75 ohm antenna jack.

Antenna Connections

75 ohm
Antenna Jack

from cable TV source

Combination
VHF/UHF Antennas

300 ohm
Flat Wire

300 to 75
ohm Adapter

75 ohm
CATV Cable

75 ohm
Antenna
Jack

75 ohm
Coaxial
Cable

75 ohm CATV Cable

300 to 75
ohm Adapter

300 ohm Flat Wire

300 to 75 ohm
Adapter

1.

2.

TV rear

28

Advertising