External equipment connection and viewing setups, Vcr connections, S-vhs vcr connections – Zenith R40W46 User Manual
Page 30: Monitor out setup, Tv playback vcr second tv tv, Playback vcr tv
External Equipment Connection and Viewing Setups
S
- VIDEO
( )
VIDEO (L)-AUDIO-(R)
MONITOR
OUTPUT
IN
2
DVI
AUDIO
IN
1
MONO
( )
VIDEO (L)-AUDIO-(R)
MONITOR
OUTPUT
IN
2
DVI
AUDIO
IN
1
MONO
30
VCR Connections
1. Connect the audio/video output jacks from the
VCR to IN 1 (A/V) jacks on the TV.
2. Use the tv/video button to select
Video 1
.
• If you connect the audio/video output jacks
from the VCR to the IN2, IN3 or IN4 jacks on
the TV, select
Video 2
,
Video3
, or
Video 4
.
3. Press the PLAY button on the VCR.
The video playback appears on the TV screen.
Notes
• If using a monaural VCR, connect the output
jack from VCR to the AUDIO L/MONO IN jack
on TV so that the sound can be heard from both
speakers. If you connect the output jack to the
AUDIO R IN jack on the TV, the sound is only
heard from right speaker.
• When the input jacks on the front panel and
back panel are connected to external equipment
at the same time, the input jacks on the front
panel have priority over the input jacks on the
back panel of the TV.
S-VHS VCR Connections
1. Connect the S-VHS output jack from the VCR
to one of the available S-VIDEO jacks on the
TV.
2. Connect the audio/video output jacks from the
VCR to the IN 1 or IN 3 jacks on the TV.
3. Use the tv/video button to select
Video
1
or
Video
3
.
4. Press the PLAY button on the VCR.
The video playback is visible on the TV screen.
Monitor Out Setup
1. Connect the audio/video input jacks from
Second TV/Monitor to the MONITOR OUTPUT
(A/V) jacks on the TV .
2. See the operating manual of the second TV or
monitor for further details regarding that
device’s input source selection.
TV
Playback VCR
Second TV
TV
( )
VIDEO (L)-AUDIO-(R)
MONITOR
OUTPUT
IN
2
DVI
AUDIO
IN
1
MONO
Playback VCR
TV