ZyXEL Communications VES-1616 - Manual (Page 30)

ZyXEL VES-1616/24FA-5x Series Support Notes
All contents copyright 2008 ZyXEL Communications Corporation. 29
In this scenario, Port Based VLAN is used to separate one physical switch into
two smaller logical switches. Ports 1~4 and 17, 18 belong to the same VLAN
group, and ports 5~8 are in another group. Port-based VLANs are specific only to
the switch on which they were created.
Configuring the Switch Using the Web Configurator
1. Use an RJ-45 Ethernet cable to connect a computer to the management port
on the switch.
2. By default the management IP address of the switch is 192.168.0.1/24
3. Set the IP settings on your computer to 192.168.0.2/24
4. Open a web browser such as IE and enter
http://192.168.0.1 as the URL.
5. When prompted, enter “admin” as the username and “1234” as the password.
6. After you have logged in successfully, the main web configurator screen
displays.
PC B PC C PC D
PC Z
Port 5 ~ 8
PC A
Port 1 ~ 4