ZyXEL Communications VES-1616 - Manual (Page 60)

ZyXEL VES-1616/24FA-5x Series Support Notes
All contents copyright 2008 ZyXEL Communications Corporation. 59
Network Scenario
Configuring Switches A, E, F and H Using the CLI
On switches A, E, F and H, create a VLAN (with VID 1) which contains all the port
members. By default VLAN1 is already created for you. The setting required is to
make sure that port 17 is a member of VLAN 1 and that egress tagging is enabled
on the port.
*By default all the ports in VLAN 1 are untagged during Egress.
1. On switches A, E, F and H, create a VLAN (with VID 1) which contains all the
port members. By default VLAN1 is already created for you. The setting required
is to make sure that port 17 is a member of VLAN 1 and that egress tagging is
enabled on the port.
*By default all the ports in VLAN 1 are untagged during Egress.
2. Connect your computer to the console port on the switch.
3. Open a Terminal program (for example Hyper Terminal in Windows)
4. Configure the console port settings as shown next.
Bps: 9600
Company XX branch
VLAN 30|VLAN 2
VLAN 30|VLAN 2
VLAN 40|VLAN 2
VLAN 40|VLAN 2
VLAN 2
VLAN 2
VLAN 2
VLAN 2
Company XX HQ
Company YY branch
Company YY HQ
1
2
3
Switch
H
Switch
A
Switch
C
Switch
B
Switch
D
Switch
E
Switch G
Switch
F
Port
26
Port
1
Port
1
Port
1
Port
2
Port
27
Port 17
Port 17
Port 17
Port 17
Port 25
Port
25
Port
25
Port 25