Telnet commands, Suppress telnet echo option, Telnet binary options – Xerox -05W User Manual
Page 188: Telnet break settings, Telnet eor options, Initialization commands, Telnet commands -12
11-12
Initialization Commands
Telnet Commands
Suppress Telnet Echo Option
Private Profile File: TelnetEchoSuppress=Yes
Command Line:
Not applicable
Default Setting:
No
This command will suppress TeemTalk generation of the Telnet echo option on
connection. It must be placed under the [Sessions] heading in the TeemTalk private
profile file.
Telnet Binary Options
Private Profile File: TelnetBinary=Yes or No
Command Line:
Not applicable
Default Setting:
Not applicable
This command will force generation of Telnet do (Yes) or dont (No) Binary options
to be sent to the host. It must be placed under the [Sessions] heading in the TeemTalk
private profile file.
Telnet EOR Options
Private Profile File: TelnetEOR=Yes or No
Command Line:
Not applicable
Default Setting:
Not applicable
This command will force generation of Telnet do (Yes) or dont (No) EOR options to
be sent to the host. It must be placed under the [Sessions] heading in the TeemTalk
private profile file.
Telnet Break Settings
Private Profile File: TelnetSendBreakTM=Yes or No
TelnetSendBreakCR=Yes or No
Command Line:
Not applicable
Default Setting:
TM only
These commands enable you to specify whether or not a timing mark (TM) and/or
carriage return (CR) is sent with a Telnet break. They must be placed under the
[Sessions] heading in the TeemTalk private profile file.