Zenoah EDG2300R - Manual (Page 14)

14
engine, hold it firmly in place so as to ensure that nor
the throttle may not come into contact with any
obstacles when the engine starts up.
• Never place the throttle into the high speed position
when starting the engine.
• After starting up the engine, check to make sure that
the drills stop rotating when the throttle is moved
fully back to its original position. If the drills continue
to rotate even after the throttle has been moved fully
back, turn off the engine and take the unit to your
authorized Red Max servicing dealer for repair.
■ AVOID NOISE PROBLEM
Check and follow the local regulations as to
sound level and hours of operations for portable
gas drill.
• In general, operate portable gas drill between
8a.m.and 5p.m.on week days and 9a.m.to
5p.m.weekends. Avoid using portable gas drill late at
night and/or early in the morning.
■ THINGS TO BE CAREFUL ABOUT WHEN USING
YOUR PORTABLE GAS DRILL
• When using your portable gas drill, grip the handles
of the portable gas drill firmly with both hands, place
your feet slightly apart (slightly further apart than the
width of your shoulders) so that your weight is
distributed evenly across both legs, and always be
sure to maintain a steady, even posture while
working.
• Maintain the speed of the engine at the level
required to perform drilling work, and never raise the
speed of the engine above the level necessary.
• Always be sure never to allow other persons to
come within the work area while drilling.
• Be especially careful not to slip if it is raining or if
rain has just stopped, as the ground is likely to be
slippery at such times.
• If the grass or other object gets caught in the drill
during operation, always be sure to turn off the
engine before removing the object.
• Guard against hazardous situations at all times.
Warn adults to keep pets and children away from the
area. Establish a safe method for gaining your
attention during operation. Be careful if you are
approached.
• If someone calls out or otherwise interrupts you
while working, always be sure to turn off the engine
before turning around.
NOTE
4. For safe operation
English