Xantrex Technology 300 PLUS - Manual (Page 34)

Using the Air Compressor: XPower Powerpack 300 Plus
21
Using the Air Compressor: XPower
Powerpack 300 Plus
Inflating Tires
To inflate your vehicle, motorcycle, or bicycle tires:
1. Place the valve connector securely on the tire valve stem,
and close the thumb latch.
2. Turn the compressor on, and inflate your tire to the
recommended pressure.
3. Turn the compressor off after appropriate pressure is
reached.
CAUTION
The compressor is designed for short term operation only.
Operating the compressor over an extended period of time
will cause the compressor unit to overheat and may cause
damage. Allow the compressor to cool down for 10
minutes after each 10 minutes of continuous operation.
CAUTION
Do not leave the compressor unattended while in
operation. Keep out of reach of children.
CAUTION
Do not overinflate article. Follow the manufacturer’s
recommended pressure on tires and sports equipment.
CAUTION
Allow the compressor to cool down for 10 minutes after
each 10 minutes of continuous operation.