Xantrex Technology 300 PLUS - Manual (Page 53)

Troubleshooting Reference
40
Recharge light
is still amber
and not green
after 40 hours
of charging. The voltage at the AC
wall outlet is less than
120 volts AC. Continue to charge the XPower
Powerpack for another 15 hours. The
battery will be fully charged even if
the Recharge light is still amber.
The
compressor
runs but won’t
inflate
(XPower
Powerpack
300 Plus only). The valve connector
may not be securely
placed on the valve
stem.
The item being
inflated may have a
leak.
Check that the valve connector is
securely placed on the valve stem
before closing the thumb latch.
Check that the item being inflated
has no leaks.
Check the compressor hose for any
breaks or leaks at connections.
The
compressor
runs slowly
(XPower
Powerpack
300 Plus only). The compressor may
have overheated from
excessive use.
Battery voltage is too
low.
Turn off the compressor and let it
cool down.
Check the condition of the internal
battery. The battery may need to be
recharged or replaced.
The engine
being jump
started will not
start. XPower Powerpack
battery is not fully
charged.
The engine condition
is poor.
The engine start
capacity exceeds the
XPower Powerpack
jump-start capability.
Recharge the XPower Powerpack
battery.
Have the engine serviced.
Table 4 Troubleshooting reference
Problem Possible Cause Solution