Xantrex Technology 300 PLUS - Manual (Page 45)

Replacing the Internal Battery
32
Replacing the Battery
Before attempting to replace the internal battery, make sure:
• You disconnect any charging cables, 12 volt DC
appliances, and AC appliances from the XPower
Powerpack.
• You turn off the AC Outlet On/Off switch and turn off
the fluorescent light switch.
• You remove the jump-start cables.
WARNING: Shock or Electrical Hazard
Read this entire section before disassembling the unit.
WARNING
If you do not know how to safely remove and install
batteries, have this task performed by a qualified service
technician.
WARNING
When installing the replacement battery, make sure the
battery polarity is correct. Reverse polarity will damage
the XPower Powerpack and could cause serious injury.