Yamaha 01X - Manual (Page 47)

01X Owner’s Manual
Mixing Tutorial
47
Before Using
Basics Section
Appendix
Getting Started
Reference
With Studio Manager
q Follow the basic procedure above, or at least the first
two steps—setting the controls to minimum and con-
necting the source(s).
w Make sure that the mLAN connection with your com-
puter is active.
For instructions on installing the mLAN driver and
connecting the 01X to your computer via mLAN, refer
to page 22 and the separate Installation Guide.
e Start Studio Manager.
• To use Studio Manager with the 01X, the mLAN port must be set
to 4. (See page 95.)
r Studio Manager automatically detects the connected
01X and after a short pause prompts you to select the
type of link (synchronization) for your computer and
the 01X.
Click on “Console → PC” here.
t Set the levels on the 01X.
Follow the same procedure as you did in step 4 in the
previous instructions.
You can use the software controls to adjust the level.
Notice that the faders on the 01X move when you move
the software faders.