Protocol-based vlan commands, 1 protocol-based vlan overview, 2 command summary – ZyXEL Communications ZyXEL Dimension ES-2024PWR User Manual
Page 183: Protocol-based vlan commands (183)
Ethernet Switch CLI Reference Guide
183
C
H A P T E R
49
Protocol-based VLAN
Commands
Use these commands to configure protocol based VLANs on the Switch.
49.1 Protocol-based VLAN Overview
Protocol-based VLANs allow you to group traffic based on the Ethernet protocol you specify.
This allows you to assign priority to traffic of the same protocol.
See also
for subnet-based VLAN commands and
for VLAN commands.
49.2 Command Summary
The following section lists the commands for this feature.
Table 104 protocol-based-vlan Command Summary
COMMAND
DESCRIPTION
M
P
show interfaces config <port-
list> protocol-based-vlan
Displays the protocol based VLAN settings for the specified
port(s).
E
3
interface port-channel <port-
list>
Enters subcommand mode for configuring the specified ports. C
13