Gvrp commands, 1 command summary, 2 command examples – ZyXEL Communications ZyXEL Dimension ES-2024PWR User Manual
Page 91: Gvrp commands (91)
Ethernet Switch CLI Reference Guide
91
C
H A P T E R
19
GVRP Commands
Use these commands to configure GVRP.
19.1 Command Summary
The following section lists the commands for this feature.
19.2 Command Examples
This example shows the Switch’s GVRP settings.
This example turns off GVRP on ports 1-5.
Table 53 gvrp Command Summary
COMMAND
DESCRIPTION
M
P
show vlan1q gvrp
Displays GVRP settings.
E
13
vlan1q gvrp
Enables GVRP.
C
13
no vlan1q gvrp
Disables GVRP on the Switch.
C
13
interface port-channel <port-
list>
Enters config-interface mode for the specified port(s).
C
13
gvrp
Enables this function to permit VLAN groups beyond the local
Switch.
C
13
no gvrp
Disable GVRP on the port(s).
C
13
sysname# show vlan1q gvrp
GVRP Support
-----------------------
gvrpEnable = YES
gvrpPortEnable:
sysname# configure
sysname(config)# interface port-channel 1-5
sysname(config-interface)# no gvrp
sysname(config-interface)# exit
sysname(config)# exit