Appendix c setting up appsocket – Xerox 701P91273 User Manual
Page 47
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION
15-3
Appendix C Setting up APPSOCKET
1. Press On Line
on the Control Panel. Verify the LED to the left of the button is
OUT.
2. Press
Menu
. The ON-LINE message will disappear and TOP MENU should be
displayed.
3. Press
Up+
until
<COMMUNICATIONS>
appears on the Display Panel and
then press
Enter
.
The APPSOCKET default settings are:
<APPSOCKET>
=
<ENABLE> = <YES>
<MODE>
=
<AUTOSELECT>
The Mode options are not applicable for APPSOCKET. The setting should
always remain at AutoSelect.
To change the settings, follow these steps:
4. Press
Up+
until
<NETWORK SETUP>
is displayed and then press
Enter
.
5. Press
Up+
until
<TCP/IP>
is displayed and then press
Enter
.
6. Press
Up+
until
<APPSOCKET>
is displayed and then press
Enter
.
7. Press
Enter
while
<ENABLE>
is displayed.
To enable APPSOCKET press
Enter
while
<YES>
is displayed.
To disable APPSOCKET press
Up+
until
<NO>
is displayed and then press
Enter
.
8. Press
On Line
. Verify the LED to the left of this button switches ON.
NOTE: