Xerox Document WorkCentre 450C - Manual (Page 118)

118
3. Do one of the following:
• If a password is not required, press ENTER .
• If a password is required, press RIGHT ARROW
and ENTER . Type the password and press ENTER .
4. Press START .
Receiving faxes to your PC
The WorkCentre 450c provides a CCITT-compatible Class
2 interface for sending and receiving fax documents using
your PC. To use the WorkCentre as a fax modem for your
PC, a fax application must be installed on your computer.
If you are running Windows 95, you can install Microsoft
Fax or Symantec Winfax Pro 7.5. If you are running
Windows 3.1/3.11, install Symantec WinFax Lite 4.0
(provided with the WorkCentre 450c) or Symantec WinFax
Pro 4.0.
Setting up Microsoft Fax to receive faxes
from your PC
5. By default, the WorkCentre is set to receive incoming
faxes. Before you can receive fax a document using
Microsoft Fax, you need to start Microsoft Exchange
and set up your modem properties.