Xerox Document WorkCentre 450C User Manual
Page 71
71
Note If you frequently send faxes to a fax number that
requires a charge code, you can create an individual
speed dial entry in your Phonebook that includes your
charge code. Using speed dialing, you can quickly
enter both the fax number and charge code with the
press of one key.
1. At the WorkCentre 450c, press the
MENU
key.
2. Press
5
[Setup] and
ENTER
.
3. Press
7
[Control panel] and
ENTER
.
4. Press
4
[Pause key] and
ENTER
.
5. Press
RIGHT ARROW
to display [dial options] and
ENTER
.
The WorkCentre sounds a confirmation beep.
6. Press
STOP
to exit the menus.
7. Load up to 20 pages face down in the document tray.
8. Enter the fax number.
Note If you need to add a pause (timed interval) in the
fax number, press PAUSE and then ENTER. A
comma displays for each pause you add.
9. When you need to enter a charge code, press the
PAUSE
key to display the dial options menu.
Dial options
pause