Xerox Document WorkCentre 450C - Manual (Page 67)

67
When you choose a photo setting, the WorkCentre
automatically sets the resolution to fine if it was
previously set to standard.
5. Press the RESOLUTION key several times to switch
among these options:
Note Fine and superfine assure you of a better quality
fax. However, the fax transmission time is longer,
which may increase your telephone cost. Generally,
standard resolution is good for documents with font
sizes of 10 points and larger; fine and superfine
improve readability of documents with font sizes
smaller than 10 points.
6. Do one of the following:
• Using the numeric keypad, enter the fax number.
To change the fax number, press the LEFT
ARROW key to move the cursor to the left, press
the RIGHT ARROW key to move the cursor to the
right, and press the EXIT/CLEAR key to delete a
highlighted number.
Photo darken For photographs and grayscale documents
that are too light.
Standard 200 x 100 dots per inch.
Fine 200 x 200 dots per inch.
Superfine 300 x 300 dots per inch.