ZyXEL Communications Prestige 202 - Manual (Page 35)

ZyXEL M-202 User’s Guide
Chapter 3 ZyXEL Utility Configuration 35
C
H A P T E R
3
ZyXEL Utility Configuration
This chapter shows you how to configure your ZyXEL M-202 in wireless station mode.
3.1 The Link Info Screen
When the ZyXEL Utility starts, the Link Info screen displays, showing the current
configuration and connection status of your ZyXEL M-202.
Figure 13 Link Info
The following table describes the labels in this screen.
Table 6 Link Info
LABEL DESCRIPTION
Wireless Network
Status
Profile Name This is the name of the profile you are currently using.
Network Name
(SSID)
The SSID identifies the Service Set to which a wireless station is associated. This
field displays the name of the wireless device to which the ZyXEL M-202 is
associated.
AP MAC Address This field displays the MAC address of the wireless device to which the ZyXEL M-
202 is associated.
Network Type This field displays the network type (Infrastructure(BSS) or Ad Hoc) of the
wireless network.
Transmission Rate This field displays the current transmission rate of the ZyXEL M-202 in megabits
per second (Mbps).