ZyXEL Communications Prestige 202 - Manual (Page 42)

ZyXEL M-202 User’s Guide
42 Chapter 3 ZyXEL Utility Configuration
The following table describes the labels in this screen.
3.2.3 Confirm Save Screen
Use the Confirm Save screen to confirm and save the security settings.
Figure 20 Confirm Save Screen
Table 12 Security Settings: 802.1x
LABEL DESCRIPTION
Authentication
Type
Select an authentication method from the drop down list. Options are TLS, TTLS
and
PEAP.
Login Name Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
Password This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
Certificate This field is only available when you select TLS in the Authentication Type field.
Select a certificate from the drop-down list box.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Server CA Select the server certificate or select <Trust Any> as default.
PEAP Inner EAP This field is only available when you select PEAP in the Authentication Type field.
The PEAP protocol is MS CHAP v2.
Back Click Back to go to the Site Survey screen to select and connect to other network.
Next Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 3.2.3 on page 42 .
Exit Click Exit to return to the Site Survey screen without saving.