ZyXEL Communications Prestige 202 - Manual (Page 45)

ZyXEL M-202 User’s Guide
Chapter 3 ZyXEL Utility Configuration 45
3.3.1 Adding a New Profile
Follow the steps below to add a new profile.
1 Click Add in the Profile screen. An Add New Profile screen displays as shown next.
Click Next to continue.
Figure 22 Profile: Add New Profile
The following table describes the labels in this screen.
Security This field shows whether data encryption is activated (WEP (WEP or 802.1x),
WPA, WPA-PSK, WPA2, WPA2-PSK) or inactive (DISABLE).
Transfer Rate This field displays the transfer speed of the selected profile in megabits per second
(Mbps).
Table 14 Profile Screen (continued)
LABEL DESCRIPTION
Table 15 Profile: Add New Profile
LABEL DESCRIPTION
Add New Profile
Profile Name Enter a descriptive name in this field.
SSID Select an available wireless device in the Scan Info table and click Select, or enter
the SSID of the wireless device to which you want to associate in this field
manually. Otherwise, enter Any to have the ZyXEL M-202 associate to or roam
between any infrastructure wireless networks.
Network Type Select the Infrastructure radio button to associate to an AP. Select the Ad-Hoc
radio button to associate to a peer computer.
Next Click Next to go to the next screen.
Exit Click Exit to go back to the previous screen without saving.
Scan Info This table displays the information of the available wireless networks within the
transmission range.