Load the laundry, Measure out the detergent, Measure out the fabric softener – Zanussi ZWF 1210W User Manual

Page 10: Select the required programme, Select the spin reduction or option, Select the required option(s), Start the machine

Advertising
background image

10

WASHING 2 KG OF MIXED FABRICS AT 50°C
Suppose you have 2 kg of lightly soiled mixed fabrics to
wash. They are rather delicate fabrics and should not be
washed at a high temperature.

1. Load the laundry

Open the door by carefully pulling the door handle
outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment

.

If you wish to carry out the prewash phase, pour the
detergent into the compartment marked

.

3. Measure out the fabric

softener

If required, pour fabric softener into the compartment
marked

(the amount used must not exceed the

“MAX” mark in the drawer).
Close the drawer gently.

C0096

C0095

P0004

4. Select the required

programme

Turn the programme selector dial to the 50 programme.
The Start/Pause light starts to flash. The pilot lights
corresponding to the various phases making up the
programme come on.

5. Select the spin reduction

or option

Press the option button repeatedly, to select the desired
option. The relevant light illuminates.

6. Select the required option(s)

Select “Prewash” or “Super Rinse” option if required,
the corresponding light illuminates.

7. Start the machine

Before starting up the machine check that:

the appliance is plugged in

the water supply tap is turned on

the drain hose is correctly and securely positioned

the door and the detergent dispenser drawer are
closed.

132989470.qxd 26/04/2004 10:54 Pagina 10 (Nero/Process Black pellicola)

Advertising