The control panel, 2 option button, 3 prewash button – Zanussi ZWF 1210W User Manual

Page 6: 4 super rinse button, 5 half load button, 6 start pause button, 7 programme progress display

Advertising
background image

6

1 Detergent dispenser drawer

Programme Option buttons

Depending on the programme, different functions can
be combined. These must be selected after choosing the
desired programme and before depressing the
Start/Pause button.
When these buttons are pressed, the corresponding pilot
lights come on. When they are pressed again, the pilot
lights go out.
If an incorrect option is selected, the corresponding
pilot light flashes for about 2 seconds.

2 Option button

By depressing this button you can reduce the final and
the intermediate spin speeds or select the Rinse Hold
(anti-crease) option. The corresponding pilot light
comes on.

: by selecting this option the speed will be

reduced as follows:
Cotton: from 1200 to 550 r.p.m.
Mixed fabrics and wool: from 900 to 450 r.p.m.
Delicates: from 700 to 450 r.p.m.

: by selecting this option the water of the last

rinse is not emptied out to prevent the fabrics from
creasing. When the programme has finished the
phase light End is on and the door is blocked to
indicate that the water must be emptied out.

To do this:

turn the programme selector dial to “O

select the drain

or spin

programme.

The machine will perform the spin at the maximal
speed .You can choose the speed by means of the
same button to adapt it to the fabrics to be spun.

depress Start/Pause button

.

The Control Panel

-

1

2 3 4 5 6 7

8

3 Prewash button

Select this option if you wish your laundry to be
prewashed before the main wash (not available for
wool programmes and Worne once
).
The prewash ends with a short spin in programmes for
cotton and mixed fabrics, whereas in the programme
for delicate fabrics the water is only drained.

4 Super Rinse button

This option can be selected with all programmes except
the wool programmes
and Worne once. The machine
will perform 2 additional rinses. This option is
recommended for people who are allergic to detergents,
and in areas where the water is very soft.

5 Half Load button

Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 2.25 kg).

The machine will perform 2 rinses instead of 3.

6 Start Pause button

After having selected the required programme, press
this button to start the machine; the corresponding pilot
light stops flashing.
To interrupt a programme which is running, depress the
Start/Pause button: the corresponding pilot light starts
to flash.
To restart the programme from the point at which it was
interrupted, press the Start/Pause button again.

7 Programme progress display

At the beginning of the programme, only the
WASHING light stays on. When the programme has
finished, the End pilot light comes on.

132989470.qxd 26/04/2004 10:54 Pagina 6 (Nero/Process Black pellicola)

Advertising