Zanussi ZWF 1210W - Manual (Page 8)

8
Operating Sequence
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment
of
the detergent drawer in order to activate the ECO valve.
Then run a synthetic cycle at 60°C, without any laundry
in the machine, to remove any manufacturing residue
from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 4.5 KG OF WHITE COTTON AT 90°C
Suppose you have 4.5 kg of heavy soiled laundry to
wash. It is white cotton and is suitable for high
temperature washing.
1. Load the laundry
Open the door by carefully pulling the door handle
outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment
and, if you wish to
carry out the prewash phase,
pour it into the compartment marked
.
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer). Close the drawer gently.
C0096 C0095
P0004
3. Select the required programme
Turn the programme selector dial to the 90 programme.
The light Start/Pause starts to flash.
4. Select the spin reduction
or option
Press the option button repeatedly, to select the desired
option. The relevant light illuminates.
5. Select the required option(s)
Select “Prewash” or “Super Rinse” option if required,
the corresponding light illuminates.
132989470.qxd 26/04/2004 10:54 Pagina 8 (Nero/Process Black pellicola)