Yamaha AW4416 User Manual

Page 149

Advertising
background image

Chapter8—Patching

— Operation Guide

137

2. Move the cursor to the output jack whose patching you wish to change,

and use the [DATA/JOG] dial to select the signal that you wish to assign.

The following types of signal can be assigned to each output jack.

❍ OMNI OUT jacks 1–4

❍ DIGITAL STEREO OUT jack
❍ STEREO OUT jacks

❍ Digital I/O card (slot 1) OUTPUT 1–8
❍ Digital I/O card (slot 2) OUTPUT 1–8

Tip!

When selecting a signal for assignment to an output jack, selections beginning with
“I-” such as “I-I8” or “I-M16” may be displayed in gray. Selections beginning with
“I-” indicate insert-out points of each channel. The gray display indicates that this
insert point is invalid. (For details on insert I/O patching, refer to page 140.)

Display

Type of signal

AUX 1 – AUX 8

AUX buses 1–8

RDR 1 – RDR16

Recorder direct out 1–16

ST L/ST R

L/R channels of the stereo output channel

BUS 1 – BUS 8

Buses 1–8

DIR 1 – DIR16

Input channel direct out 1–16

Display

Type of signal

ST L/R

Stereo output channel

BUS 1/2 – BUS 7/8

Buses 1/2–7/8

DIR 1/2 – DIR15/16

Input channel direct out 1/2–15/16

AUX 1/2 – AUX 7/8

AUX buses 1/2–7/8

RDR 1/2 – RDR15/16

Recorder direct out 1/2–15/16

Display

Type of signal

BUS 1 – BUS 8

Buses 1–8

DIR 1 – DIR16

Input channel direct out 1–16

AUX 1 – AUX 8

AUX buses 1–8

RDR 1 – RDR16

Recorder direct out 1–16

ST L/ST R

L/R channels of the stereo output channel

Advertising