Inserting an effect into monitor channel 1 – Yamaha AW4416 User Manual

Page 182

Advertising
background image

Chapter10—Internal effects

172

— Operation Guide

An effect that has been specified for insertion cannot again be used via AUX
send/return until you reassign it to the AUX bus in the EFFECT PATCH area.

If RTN 2 is set to “EFF 2 L/R” in the Patch IN page, performing this step will auto-
matically cancel the assignment.

❒ Inserting an effect into monitor channel 1

1. Press [MONI] key → [SEL] key 1.

Monitor channel 1 will be selected.

2. Press the [VIEW] key → [F1] key.

The VIEW screen CH View page will appear in the display.

3. Move the cursor to the ASSIGN button in the EFFECT INSERT area, and

press the [ENTER] key.

The EFF.INSERT SETTING popup window will appear. In this popup window, you
can use the following four buttons to select the type of effect that will be inserted.

• OFF .....................Effect insertion will be cancelled.

• INT.EFF1 ..............Insert internal effect 1.

• INT.EFF2 ..............Insert internal effect 2.

• EXTERNAL ...........Insert an external effect.

The INT.EFF1 and INT.EFF2 buttons cannot be turned on if the respective internal
effect 1/2 has not been disconnected from AUX send.

Advertising