Yamaha AW4416 User Manual

Page 194

Advertising
background image

Chapter11—Song management

184

— Operation Guide

3. Move the cursor to the list in the upper part of the display, and use the

[DATA/JOG] dial to select the import source song from which you wish
to import mixer data.

4. Press the [ENTER] key.

An “E” symbol will appear at the left edge of the list, and the corresponding song
will be selected as the import source for mixer data.

• The current song cannot be selected as the import source. If you execute

Import when the current song is marked with an “E” symbol, an error message
will be displayed.

• It is not possible to select two or more songs as the import source.

5. Move the cursor to the MIXER IMP button and press the [ENTER] key.

The MIXER DATA IMPORT popup window will appear.

6. Turn on the button(s) for the type(s) of mixer data that you wish to

import. (You may select more than one.)

• SCENE MEM. button ....Scene memories

• AUTOMIX button .........Automix

• TEMPO MAP button .....Tempo map

• LIBRARY button ...........Libraries (channel/EQ/dynamics/effect)

7. To execute the Import, move the cursor to the OK button and press the

[ENTER] key.

Tip!

If you decide to cancel the Import command without executing, move the cursor to
the CANCEL button and press the [ENTER] key.

Advertising