Zenoah G240RC - Manual (Page 16)

16
SERVICE GUIDE
1) REMOVING CLUTCH SHOE
1. Remove the housing and plug cap.
2. Remove the spark plug and fit the stopper(4810-
96220) into the plug hole.
3. Remove clutch bolts(14mm Hex.).
2) REMOVING ROTOR (FAN)
4. Remove the rotor nut(12mm Hex.).
5. Remove the rotor using the puller assy (2890-96100).
Apply 8mm puller bolts.
Clutch Bolt
(14mm Hex.)
Rotor Nut
17mm Hex.
Puller Bolts
Puller
Rotor