Engine starting – Zenoah G240RC User Manual

Page 8

Advertising
background image

8

ENGINE STARTING

• Push the primer pump several times until overflown fuel

flows out. (Fig.1)

• Close the choke lever, and move the throttle lever

1/4~1/3 open position. (Fig.1)(Fig.2)

• Pull the starter(knob) quickly until first firing noise.

(Fig.3)

• Open the choke(Fig.2), throttle idle~1/4 open

• Pull the starter quickly

• Operate engine for a few minutes for the warming up.

• In case of engine warm condition, choking may not be

necessary.

• Over choking may cause starting difficulty due to wet

spark plug.

In this case change spark plug or dry it, and remove

fuel rest in the cylinder by pulling starter.

IMPORTANT

Choke Lever

Open

Close

Primer Pump

Fig.1

Throttle Lever

Fig.2

Fig.3

Advertising
This manual is related to the following products: