Zanussi ZWF 1650W - Manual (Page 14)

14
2.Press the EXIT button to confirm the selection.
All indicators in the display will appear in this language
from now on.
Note:
If the undesired language has been set, press
contemporary SPIN + OPTIONS buttons for about 2
seconds in order to change the language.
Follow the instructions as before.
SETTING THE TIME
You should set the time prior to the first wash and when
changing to and from daylight savings time.
See «Clock setting», Menu.
5. Select the desired
programme/fabric
Turn the selector dial, in order to select the desired
programme/fabric. The relevant message will appear in
the display.
The display will show the END CYCLE TIME of the
selected programme, calculated on the basis of the
maximum load for each type of fabric. The
START/PAUSE button light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
END CYCLE relevant to the maximum load. The
duration value will be gradually adjusted during the
execution of the cycle.
Change Options Exit
Cotton
Cycle and at
08.30
10.55
60°C 1400
Temp. Spin
M1
M2
M3
E
Change Options Exit
Einstellungen
B
Temp. Spin
6. Select the temperature
Press the “TEMP.” button if you wish to select a
temperature value different from the one proposed by
the washing machine.
The message of the maximum available temperature
appears on the second row of the display (instead of
«cycle end at»). In the corner of the third row appears
the indication of the selected temperature.
7.Select the Spin Speed “Spin”,
the Rinse Hold or Night
cycle .
Press the SPIN SPEED button repeatedly, in
order to select the desired spin speed or No Spin «O» or
the Rinse Hold
or the Night Cycle options. The
relevant message will appear on the second row of the
display. The selected spin level will be shown on the
third row next to the spin button.
If you select the Rinse Hold or Night Cycle options,
the machine will stop at the end of the programme with
the water still in the tub.
8. Select the desired options
Depress the relevant buttons to select the required
options.
Depending on the selected programme only certain
options are available and shown during the selection
phase.
Note: Not all the options are compatible between
themselves. The uncompatible option icons will
disappear.
Change Options Exit
COTTON
MAX 1400
08.30
10.55
1200 40°C
Temp. Spin
Change Options Exit
COTTON
MAX 95°C
08.30
10.55
40°C 1400
Temp. Spin
132989090.qxd 24/05/2004 15:46 Pagina 14 (Nero/Process Black pellicola)