Select the delay time, Start the programme, How to change a programme during its cycle – Zanussi ZWF 1650W User Manual

Page 15: Cancelling a programme

Advertising
background image

15

9. Select the DELAY TIME

Before you start the programme, if you wish the starting
to be delayed, choose the DELAY option.
The selected delay time value (up to 20 hours) will
appear on the display while selecting.
The end cycle will be updated and shown on the relative
position of the display.

10. Start the programme

Press the START/PAUSE button. The relevant light will
stop flashing. The message relevant to the phase that is
in progress will be shown in the display.
If you have chosen a delayed start, the washing machine
will begin the countdown.

11. How to change a

programme during its cycle

Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any phase before the programme
carries it out.
When the programme has started, you can only reset it
by turning the programme selector dial to OFF and then
you can select the new programme. The washing water
remains in the tub.Start the new programme by
depressing the START/PAUSE button.
Note: To drain the water before starting the new cycle
you have to cancel the programme and select the
“Drain” programme.

Change

Options

Exit

COTTON

Washing

08.30

12.00

40°C 1200

Temp.

Spin

START/PAUSE

Change

Options

Exit

Delay Start

Start in 30 min

11.25

Temp.

Spin

Change

Options

Exit

Delay Start

No

10.55

Temp.

Spin

12. Cancelling a programme

Turn the selector dial to OFF to cancel a programme
which is running. Now you can select a new
programme.

13. How to open the door

during the cycle of a
programme

You can open the door, after having set the washing
machine to PAUSE, provided the following conditions
exist:

the washing machine is not in the heating phase

beyond 55°C;

the level of the water is not high;

the drum is not turning.

If these requirements are met, when you pause the
washing machine, the relevant message appears in the
display the door can be opened.
Should it not be possible to open the door, the “Door
openable” message appears in the display, should it be
absolutely necessary to do so, switch the machine off by
turning the selector dial on OFF position.
After approximately 3 minutes, you can open the door.

Pay attention to the level and temperature of the
water in the washing machine!

132989090.qxd 24/05/2004 15:46 Pagina 15 (Nero/Process Black pellicola)

Advertising
This manual is related to the following products: