Xerox DC - Manual (Page 195)

Xerox Document Centre Reference Guide Page 10 - 33
10
. Too
ls
Single Job Mode
This feature limits the job queue by allowing one copy job at a time.
You can program ahead but each job must be completed before the
system will scan the next job.
NOTE This feature is available on DC models only. Depending on your
machine configuration, this feature may appear on the System
Settings 3 Screen.
How to get here
(On DC model only)
Tools Screen 1
System Settings 1
More
System Setting
System Settings 2
More
System Settings 3
Single Job Mode